DC to 400 kHz LF Personal Monitor



Wavemon

WaveMon LF-400

LF Personal Monitor

 
STATIC FIELD DETECTION 0 Hz - Isotropic hall effect sensor

LOW FREQUENCY DETECTION 10 Hz to 400 kHz - Isotropic coil-based sensor

ACCORDING TO ICNIRP GUIDELINES For general public and occupational exposure

EXPOSIMETER WITH DATALOGGER Data collecting and Reporting

GPS AND ALTIMETER Geolocation of measurements

HIGH INTENSITY AUDIBLE, VISIBLE AND VIBRATORY ALARM With user definable trigger threshold

USB COMMUNICATION PORT Data downloading, set-up and battery charging


Data sheet     Order now →

WaveMon LF-400

Image

PUBLIC AND OCCUPATIONAL LIMITS

 

The WaveMon LF-400 is an exposimeter that warns the user of a high level of exposure to low frequency magnetic fields.

Warnings are given as a percentage of exposure to a defined limit of a specific standard. It can work with general public or occupational limits.

The following exposimeters are now available:

  • WaveMon LF-400 ICN → For the ICNIRP guidelines
  • WaveMon LF-400 EUD → For the European EMF Directive 2013/35/EU
  • WaveMon LF-400 IEEE → For the IEEE standards

If you need a personal low frequency monitor that specifically follows any other standard, please let us know.

 

DATALOGGER

 

The WaveMon LF-400 is a low frequency exposimeter that has a datalogger for continuous data recording.

Communication with the device is through a USB port that allows you to configure the device and download the recorded data. This makes it easy to create reports and allows you to keep a record of your exposure data for your safety.

 

 

Image
Image

CONVENIENCE AND SECURITY

 

We have created an accessory that allows you to attach the personal monitor to your harness, arm or belt and so take it in hand to hold it near a radiation source and then put it back in place easily.

You can also secure it with a small carabiner so that it won’t be dropped.

BATTERIES

 

The device is small and lightweight and works with AA batteries that can be recharged via the USB port. It can also use standard AA batteries, so that they can always be easily replaced.

Easy, isn’t it? Because we want you always to be protected.

Image
Image

GPS AND ALTIMETER

 

The WaveMon is the only personal monitor equipped with a GPS and Altimeter for geolocation of measurements.

As an example, in a high voltage tower, the GPS will provide the geographical position of the tower and the Altimeter the relative height from the ground.

USER-CONFIGURABLE ALARMS

 

Over-exposure alarms can be configured from a PC using the USB connection.
Two different alarms can be programmed and personalised separately for each of the standards: General Public and Occupational.
The alarm level (% of the selected limit) and the type of alarm (sound, vibration or both) can be set-up.

Image

MAIN CHARACTERISTICS OF THE WAVEMON LF-400

  • Conforms to international electromagnetic field safety standards

  • H/B-field measurements from 0 Hz to 400 kHz

  • Isotropic sensors

  • Weighted response for direct comparison with the standard limit

  • User-configurable alarms

  • High intensity audible, visible and vibration alarms

  • Customisable alarm threshold

  • Optional GPS and altimeter

  • Datalogger to report and record data

  • USB for PC connection to parameterise and download data

  • Small and lightweight

  • Powered by 2 standard disposable or rechargeable (via USB port) batteries

W 208 margen

Wavecontrol S.L.
Carrer de Pallars 65-71
08018 Barcelona (Spain)
European Union
This email address is being protected from spambots. You need JavaScript enabled to view it.
Tel +34 933 208 055
 
              

Wavecontrol Inc.
301 Route 17 North, Suite 402
Rutherford, NJ 07070
United States of America
This email address is being protected from spambots. You need JavaScript enabled to view it.
Tel +1 201 479 9022
 


Our Cookie Policy


This website uses cookies to improve your experience. By continuing to use this website you are giving consent to cookies being used. More info here.