New video on how to do a Static Human Field Exposure Assessment

New SMP2 videos about Human Exposure to EMF Assessment with the SMP2 Field Meter!

Wavecontrol launches a series of 4 videos to show how to carry out the most common EMF assessments with the SMP2 Field Meter, in combination with the compatible electromagnetic probes for every application.

The first video explains how to perform a Static Human Field Exposure Assessment with the SMP2 and the WPH-DC probe.

This type of evaluation is ideal for medical applications involving MRI devices, railway environment, and industrial settings.

 

Instructions

  • Select the Field type to DC (Button AC/DC).
  • Move the SMP2 around and look for maximum levels or place it at the desired position.
  • Set MODE to “Time”.
  • Go to MENU → MEASUREMENT OPTIONS.
  • Set “Measurement time” to “Not limited”.
  • Press LOG to start the measurement.
  • Your Max value will appear in the Max/Min set of results.
  • Leave your unit stationary and wait for a reasonable time until you see the max value not increasing any more.
  • Press LOG to save the measurement.
  • Compare the maximum DC value with your standard.

 

More videos

The full series includes the following 4 videos for you to get started with the SMP2. Subscribe to our YouTube channel to keep posted!

  • Static Field Human Exposure Assessment (This video)

    Range: 0 Hz
    SMP2 and WPH-DC Probe

  • Low Frequency Human Exposure Assessment (Coming soon)
    Range: 1 Hz – 400 kHz

    SMP2 and WP400, WP400-3, WP50, and WPH-DC Probes

  • High Frequency Human Exposure Assessment (Coming soon)
    Range: 100 kHz – 300 GHz and WPF3, WPF6, WPF8, WPF18, WPF40, WPF60, WPH60, WPH1000, and WPT Probes
  • Low Frequency Spectrum Investigation (Coming soon)

    Range: 1 Hz – 400 kHz
    SMP2 and WP400, WP400-3, WP50, and WPH-DC Probes


⟶ Interested in the SMP2? Need to carry out an EMF assessment? Please contact usWe will be delighted to answer any questions.