Wavecontrol October Webinars

 At Wavecontrol, we have prepared 4 webinars during October with practical information about EMF basics, products and applications, including:

  • Getting started with the devices
  • Main features
  • International standards and regulations
  • Firmware and software
  • A dedicated Hands-On Session with tips and best practices
  • Open Question and Answers session
SCHEDULE
  1. EMF and Health – 7th October 2020
  2. EMF in the Energy industry – 14th October 2020
  3. WaveMon – 22nd October 2020
  4. SMP2 – 27th October 2020
TIME SLOTS
  • Different slots for all webinars.
  • Times are in CET (GMT +2) for Europe / EST (GMT - 4) for USA. Don't forget to check your local time!
 
↓ PLEASE REGISTER THROUGH THE LINKS BELOW ↓
 



1 – Webinar EMF and health – EMF Basics


The webinar is going to introduce EMF and its associated health effects (sensory and thermal) at different frequency ranges (static fields, low frequency and radiofrequency). We will talk about the safety regulations (particularly the EU directives) and EMF assessment for different industries.

Finally, we will introduce solutions from Wavecontrol to measure and evaluate EMF fields from 0 Hz to 60 GHz. 

7th October 2020

Register in one of the sessions below:

English | 9:30 am CET (Europe time) / 3:30 am EST (USA time) →
Español | 3:30 pm CET (Europe time) / 9:30 am EST (USA time) →
English | 5:00 pm CET (Europe time) / 11:00 am EST (USA time) →
 



2 – EMF in the Energy industry 


This webinar will cover the evaluation methods for electromagnetic field in the energy industry. This short presentation is based on the IEC 62110 standard. There will be a short demonstration on using the SMP2.

14th October 2020

Register in one of the sessions below:

English | 9:30 am CET (Europe time) / 3:30 am EST (USA time) →
English | 5:00 pm CET (Europe time) / 11:00 am EST (USA time) →
 
 

3 – Webinar WaveMon. RF & LF Personal Monitor.

We will introduce the WaveMon Personal Monitor, an award winning exposimeter from Wavecontrol to avoid being overexposed to electromagnetic fields in low and high Frequencies – DC to 60 GHz (depending on the model). There will be live demonstration on the operational use of the personal monitor with Q&A session on its applications.

22nd October 2020 

Register in one of the sessions below:

English | 9:30 am CET (Europe time) / 3:30 am EST (USA time) →
Español | 3:30 pm CET (Europe time) / 9:30 am EST (USA time) →
English | 5:00 pm CET (Europe time) / 11:00 am EST (USA time) →
 
 


 

5 – Webinar SMP2

The SMP2 offers an unrivalled combination of 3 features:

  1. Broadband measurements (DC to 60 GHz)
  2. Frequency spectrum analysis (DC to 400 kHz)
  3. Static field measurements

In this webinar, we will talk about the SMP2 and it exceptional features such as automatic probe detection, its display functionalities, technical capabilities and unique tools for facilitating EMF measurements for excellent user experience. We will discuss the software and communication platforms for efficient data management and remote control. There will also be live demonstration on how to use the SMP2.

27th October 2020

Register in one of the sessions below:

English | 9:30 am CET (Europe time) / 3:30 am EST (USA time) →
Español | 3:30 pm CET (Europe time) / 9:30 am EST (USA time) →
English | 5:00 pm CET (Europe time) / 11:00 am EST (USA time) →