1. Webinar Household Appliances (Application Note) – 8th June 
2. Webinar EMF and Health – 10th June 
3. Webinar MonitEM – 16th June
4. Webinar MonitEM-Lab – 18th June
5. Webinar ITU K.145 and WaveMon RF-8 / RF-60 – 22th June
6. Webinar SMP2 – 25th June

• Different slots for all webinars.
• Times are in CET (GMT +2) for Europe / EST (GMT - 4) for USA. Don't forget to check your local time!

1 – Webinar Household Appliances (Application Note)

Assessment of household appliances and similar electrical appliances (IEC 62233)
Evaluation methods for electric field strength and magnetic flux density around household and similar appliances. This short presentation is based on the IEC 62233 standard.

8th June 2020

Register in one of the sessions below:

2 – Webinar EMF and health – EMF Basics

In this webinar, the fundamentals of Electromagnetic field safety will be covered. We will introduce the concept of EM waves and also talk about direct and indirect health effects.

10th June 2020

Register in one of the sessions below:

3 – Webinar MonitEM – MonitEM outdoor

The MonitEM can monitor EMF outdoors 24/7, using AC power, battery and solar panel. The built-in modem allows remote communication with the Control Centre.

16th June 2020

Register in one of the sessions below:

4 – Webinar MonitEM-Lab

The MonitEM-Lab monitors the EMF levels 24/7 and can warn the user with built-in audible and visual alarms or remotely, through the software Control Center.

18th June 2020

Register in one of the sessions below:

5 – Webinar Recommendation ITU K.145 and WaveMon RF-8 / RF-60 

We will introduce the WaveMon Personal Monitor, an award winning exposimeter from Wavecontrol to avoid being overexposed to electromagnetic fields.

For Low and High Frequencies – DC to 60 GHz!
5G Ready and fully compliant with ITU K.145

22th June 2020

Register in one of the sessions below:

6 – Webinar SMP2

The SMP2 offers an unrivalled combination of 3 features:

1. Broadband measurements (DC to 60 GHz)
2. Frequency spectrum analysis (DC to 400 kHz)
3. Static field measurements

The SMP2 also offers excellent reporting tools, ease of operation and comparison to international regulatory limits.

25th June 2020

Register in one of the sessions below: